TECHNICAL PARAMETERS:
Type | HV-1000DT |
Test force | 10g (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g (4.9N), 1000g (9.8N) |
Rulers | HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2 |
Minimum measurement unit | 0.25m |
Measuring the hardness range | 1HV-4000HV |
Hardness value read | Digital LCD |
Total magnification | 100X (observed), 400X (measurement) (Expandable up to 200X or 600X) |
Loading mode | Fully automatic (loading, dwell, unloading) |
Holding Time | 1-99 seconds |
The objective lens and the press head switch | The manual transfer Taqie change |
Specimen allows a maximum height | 85mm |
Indenter center to wall distance | 110mm |
Instrument Size | 405 290 480mm (Lx W x H) |
Instrument Weight | 45kg |
Light source | LED cold light source (continuous 24-hour use life of up to 100,000 hours) |
Power supply | 110V/220V + 5%, 50/60 Hz |
XY table | Dimensions: 100 - 100 mm, the largest mobile: 25 - 25mm Minimum reading: 0.01mm (Optional digital XY table, LCD digital display) |
Data Output | Built-in printer (hardness values, maximum and minimum test time, the number of tests, the average) Built-in RS-232 interface |
Standard fittings, accessories | 10X eyepiece micrometer a Vickers indenter a 10X and 40X objective lens of each one, and two standard hardness block, XY table, flat fixture, sheet fixtures, small parts jig a leveling screw four a bubble level, the power cord is a dust cover a manual, hardness conversion tables, certificate, warranty card, accessory case a |
METKORP EQUIPMENTS PVT. LTD
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |